<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">If we did not average over 25 Capri 25's at the starting line for each race I too would race a different boat.<div><br></div><div><br><div><div>On Dec 30, 2008, at 4:52 PM, Glenn Selvin wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><span class="Apple-style-span" style="border-collapse: separate; color: rgb(0, 0, 0); font-family: Helvetica; font-size: 12px; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0; "><div bgcolor="#ffffff" style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; "><div><font face="Arial" size="2">Our boat came with a jib cunningham... I took it off as it did little more than get in the way. Our problem has been headstay sag, plain and simple. Our "pinch the wires together" system never worked quite right, in that I think the backstay is too long, thus, the sheaves are bottoming out on those little wire legs before its becoming effective.</font></div><div><font face="Arial" size="2"></font> </div><div><font face="Arial" size="2">So... I could either drop the rig and replace the backstay with a shorter version, or, I could simply do away with the "pinch the wires together" system and simply do it the right way by cascading the shit out of it. And since there is zero Capri 25 one design sailing in Southern California, and since we're forced to race PHRF with our 25, cascading made sense.</font></div><div><font face="Arial" size="2"></font> </div><div><font face="Arial" size="2">When I want to sail one design? Thanks, but I'll sail my Finn. :)</font></div><blockquote dir="ltr" style="padding-right: 0px; padding-left: 5px; margin-left: 5px; border-left-color: rgb(0, 0, 0); border-left-width: 2px; border-left-style: solid; margin-right: 0px; "><div style="font: normal normal normal 10pt/normal arial; ">----- Original Message -----</div><div style="background-image: initial; background-repeat: initial; background-attachment: initial; -webkit-background-clip: initial; -webkit-background-origin: initial; background-color: rgb(228, 228, 228); font: normal normal normal 10pt/normal arial; background-position: initial initial; "><b>From:</b><span class="Apple-converted-space"> </span><a title="mcnamara@visi.com" href="mailto:mcnamara@visi.com">Dan McNamara</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>To:</b><span class="Apple-converted-space"> </span><a title="ghselvin@ix.netcom.com" href="mailto:ghselvin@ix.netcom.com">Glenn Selvin</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>Cc:</b><span class="Apple-converted-space"> </span><a title="mkhammett@sprintmail.com" href="mailto:mkhammett@sprintmail.com">Mark Hammett</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="garry.cooke@gmail.com" href="mailto:garry.cooke@gmail.com">Garry Cooke</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="Emanuel.Ruedenberg@bsci.com" href="mailto:Emanuel.Ruedenberg@bsci.com">Ruedenberg,Emanuel (Rudy)</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="capri25@lists.wyc.org" href="mailto:capri25@lists.wyc.org">capri25@lists.wyc.org</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="kenreiff@gmail.com" href="mailto:kenreiff@gmail.com">Kenneth Reiff</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>Sent:</b><span class="Apple-converted-space"> </span>Tuesday, December 30, 2008 2:45 PM</div><div style="font: normal normal normal 10pt/normal arial; "><b>Subject:</b><span class="Apple-converted-space"> </span>Re: [Capri25] Backstay question -- Reminder on WYC Capri 25 Fleet Rules</div><div><br></div>For those interested,<div><br></div><div>A tangental piece of equipment is the jib cunningham. On Consensus we play this more then the backstay and vang. And always in with added backstay tension to de-power in a puff. Before each race we set our rig to the lulls, our halyards to the average. When the puff hits the sheets get eased, the jib cunningham goes on hard and the driver feathers up. The jib cunningham gets eased as the bow comes down. Because of this we have never maxed out our backstay. The driver uses it to balance the helm, the trimmer may put it on hard after the genoa has been eased. It is not to say that we should not goto our backstay sooner but the reality is that the trimmer and driver have their hands full where the Foredeck can actively trim the jib cunningham in the puffs. Another advantage is it brings the Genoa draft forward, backstay alone brings the draft back. The two in tandem keep the draft forward, reduce <span class="Apple-converted-space"> </span> <span class="Apple-converted-space"> </span>headstay sag, bend the mast aft flattening the main and opening the slot.</div><div><br></div><div>I guess it would not hurt to beef up the headstay tang but I don't see a need for a more powerful backstay if all the other things you can do to keep the boat flat and going up wind are happening. </div><div><br></div><div>The whole premiss of the WYC fleet is the take an inexpensive boat (poorly design and hard to race to its rating) and race it one- design. Having just campaigned a J 24 for the North American's I have a greater appreciation for our rules ( 6 pages vs over 80 and thousands of appeals). Our scant 6 pages have captured the essence of what it takes to be a one-design by keeping the keel, rudder and rig uniform, sails to fit a box and allowing any other modifications. Starting with a POS boat it is more important to have a good crew then good gear. The WYC C25 one design rules captured this perfectly allowing each boat to layout their deck to maximize their crew work. When we get beat by more then a boat length it was either my tactics or a crew mistake that cost us. Every one in the fleet has the same design problems to overcome, how well each boat does that usually decides that race. Why any one would race a Capri 25 handicapped is beyond me.</div><div><br></div><div>Dan McNamara</div><div>WYC C25 Crew of the Year</div><div><br></div><div><br><div><br></div><div><br><div><div>On Dec 30, 2008, at 12:43 PM, Glenn Selvin wrote:</div><br class="Apple-interchange-newline"><blockquote type="cite"><span class="Apple-style-span" style="word-spacing: 0px; font: normal normal normal 12px/normal Helvetica; text-transform: none; color: rgb(0, 0, 0); text-indent: 0px; white-space: normal; letter-spacing: normal; border-collapse: separate; orphans: 2; widows: 2; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; "><div id="compText" bgcolor="#ffffff" style="font-size: 9pt; color: black; font-family: Geneva, Arial, Helvetica, sans-serif; background-color: rgb(255, 255, 255); "><div><font size="2">We are a Southern California based Capri 25. In fact, we used the factory tangs as attachment points for our cascading backstay, and upon that backstay upgrade, I decided that I'd better beef up our headstay attachment.</font></div><div><font size="2"></font> </div><div><font size="2">My plan is simply to leave the factory bow fitting in place, and to simply install a new tang, through bolted to the bow. That tang will not be welded to the bow fitting, as I don't feel like going through the gyrations of removing that factory fitting so as to take it to a welder. Instead, I'll simply install the new bow tang, laying it right over the existing factory piece. Thus, the headstay will attach to BOTH the existing factory piece, AND the bow tang through bolted to the bow.</font></div><div><font size="2"></font> </div><div><font size="2">Why Catalina didn't do this to begin with is beyond me. And as to the Wayzata fleet? Why not change your bylaws and allow the backstay upgrade? Its much nicer than the "pinch the wires together" system.</font></div><blockquote style="padding-right: 0px; padding-left: 5px; margin-left: 5px; border-left-color: rgb(0, 0, 0); border-left-width: 2px; border-left-style: solid; margin-right: 0px; "><div style="font: normal normal normal 10pt/normal arial; ">----- Original Message -----</div><div style="font: normal normal normal 10pt/normal arial; background-color: rgb(228, 228, 228); -webkit-background-clip: initial; -webkit-background-origin: initial; "><b>From:</b><span class="Apple-converted-space"> </span><a title="mkhammett@sprintmail.com" href="mailto:mkhammett@sprintmail.com">Mark Hammett</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>To:</b><span class="Apple-converted-space"> </span><a title="garry.cooke@gmail.com" href="mailto:garry.cooke@gmail.com">Garry Cooke</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="Emanuel.Ruedenberg@bsci.com" href="mailto:Emanuel.Ruedenberg@bsci.com">Ruedenberg,Emanuel (Rudy)</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>Cc:</b><span class="Apple-converted-space"> </span><a title="capri25@lists.wyc.org" href="mailto:capri25@lists.wyc.org">capri25@lists.wyc.org</a><span class="Apple-converted-space"> </span>;<span class="Apple-converted-space"> </span><a title="kenreiff@gmail.com" href="mailto:kenreiff@gmail.com">Kenneth Reiff</a></div><div style="font: normal normal normal 10pt/normal arial; "><b>Sent:</b><span class="Apple-converted-space"> </span>Tuesday, December 30, 2008 10:38 AM</div><div style="font: normal normal normal 10pt/normal arial; "><b>Subject:</b><span class="Apple-converted-space"> </span>Re: [Capri25] Backstay question -- Reminder on WYC Capri 25 Fleet Rules</div><div><br></div><p>Greetings Everyone;</p><p>I would like to remind all the local Capri 25 Fleet members that are reviewing this discussion thread that the installation of a cascaded backstay is a departure from the local fleet rules - A cascaded backstay was installed on Capri 25 #009 "Divine Inspiration" and was later disallowed because it altered the original running rig as defined by the local rules. For all the out of town Capri's its a great way to get additional purchase and manual force to reduce headstay sag and flex the mast, bending the center forward to force for a flatter main in heavy air. </p><p>Engineering Notes: Cascading Backstays and Headsail Tacks</p><p>Backstay -- The angle of the backstay is very important due to the roach of the standard mainsails. PHRF mains that conform to the original Capri 25 rules (the PHRF standard) have a greater roach than our local Capris. This means that cascading blocks should use the original chainplate positions on the stern and not be lead directly to the eye on the cockpit deck aft of the rudder post. That eye is for the adjuster rig only. If you cascade to the eye on deck the backstay angle is reduced by as much as 6 inches, which makes low wind tacks and gybes of the mainsail difficult. Especially so if you use a small amount of backstay to create a better entry on the headsail for sailing up wind. </p><p>The headstay plate -- This can be changed to the J24 hardware with minimal alterations (but to bend it with a hammer and vise may weaken the plate). Several of the local Capris in the WYC fleet have had a 6" L x 3/16" T x 1" W - SS chainplate welded to the original tack plate and have 1 to 3 countersunk 3/8" dia. screws and a reinforcement block on the inside with fender washers and lock nuts. The total length of the chainplate addition is up to the owner but 6 inches (with 2 holes) is typical. The rub-rail on the bow point does not need to be removed; just slightly altered to accommodate the chainplate thickness and width when installing it underneath. I use a 1" chissle to pry the aluminum rail from the hull. The chissle will stretch the aluminum nicely without breaking it. Just be gentle and be sure you remove the mounting screws under the rubber (the most forward ones) first.</p><p>One good thing about adding the chainplate in the bow -- it you t-bone someone -- the damage to your bow will be significantly reduced -- just ask the guys on Fore Sail who tapped Ham-It-Up! this year...</p><p>Happy sailing, <br><br>Mark Hammett<br>Capri 25 #370<br>Ham-It-Up!</p><blockquote style="padding-left: 5px; margin-left: 0px; border-left-color: rgb(0, 0, 255); border-left-width: 2px; border-left-style: solid; ">-----Original Message-----<span class="Apple-converted-space"> </span><br>From: Garry Cooke<span class="Apple-converted-space"> </span><garry.cooke@gmail.com><br>Sent: Dec 30, 2008 9:53 AM<span class="Apple-converted-space"> </span><br>To: "Ruedenberg, Emanuel (Rudy)"<span class="Apple-converted-space"> </span><emanuel.ruedenberg@bsci.com><br>Cc:<span class="Apple-converted-space"> </span><a href="mailto:capri25@lists.wyc.org">capri25@lists.wyc.org</a>, Kenneth Reiff<span class="Apple-converted-space"> </span><kenreiff@gmail.com><br>Subject: Re: [Capri25] Backstay question<span class="Apple-converted-space"> </span><br><br>sorry I noticed a typing error, the 35% should be 25%.<div>regards</div><div>Garry<br><br><div class="gmail_quote">On Tue, Dec 30, 2008 at 10:39 AM, Garry Cooke<span class="Apple-converted-space"> </span><span dir="ltr"><<a href="mailto:garry.cooke@gmail.com" target="_blank">garry.cooke@gmail.com</a>></span><span class="Apple-converted-space"> </span>wrote:<br><blockquote class="gmail_quote" style="padding-left: 1ex; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0.8ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid; ">You need to be careful how much force you are putting into your boat. The backstay tension should be limited to no more than 35% the breaking strain of the backstay wire. If you put too much tension in the rig, you will increase significantly the compression force in the mast and risk damage to the bottom of your boat. I know of two Express 30's where the owners put too much back stay tension and drove the mast down, and cracked the bottom of the boat, and in one case, let water in. I also know of some Viking 28's where the deck has been buckled by too much backstay tension. It would be wise to get a Loos gauge to ensure that you are not over stressing your rig.<div><br></div><div>good luck</div><div>Garry</div><div>Capri 25 'Endeavour' <br><br><div class="gmail_quote"><div><div></div><div class="Wj3C7c">On Tue, Dec 30, 2008 at 10:24 AM, Ruedenberg, Emanuel (Rudy)<span class="Apple-converted-space"> </span><span dir="ltr"><<a href="mailto:Emanuel.Ruedenberg@bsci.com" target="_blank">Emanuel.Ruedenberg@bsci.com</a>></span><span class="Apple-converted-space"> </span>wrote:<br></div></div><blockquote class="gmail_quote" style="padding-left: 1ex; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0.8ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid; "><div><div></div><div class="Wj3C7c"><div lang="EN-US" link="blue" vlink="blue"><div><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">You should definitely call Bruce Tamm from 'Tsunami' if he does not answer this email. He and I know others, have had terrible problems at the bow. I seem to remember that the force of the forestay separated the foredeck or something…..</span></font></p><div><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; "></span></font><br class="webkit-block-placeholder"> </div><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">good luck</span></font></p><div><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; "></span></font><br class="webkit-block-placeholder"> </div><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">rudy</span></font></p><div><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; "></span></font><br class="webkit-block-placeholder"> </div><div><div><font face="Times New Roman" color="navy" size="3"><span style="font-size: 12pt; color: navy; "></span></font><br class="webkit-block-placeholder"> </div><div><font face="Times New Roman" color="navy" size="3"><span style="font-size: 12pt; color: navy; "></span></font><br class="webkit-block-placeholder"> </div><div><font face="Times New Roman" color="navy" size="3"><span style="font-size: 12pt; color: navy; "></span></font><br class="webkit-block-placeholder"> </div><p><b><i><font face="Arial" color="navy" size="3"><span style="font-weight: bold; font-size: 12pt; color: navy; font-style: italic; font-family: Arial; ">Emanuel 'Rudy' Ruedenberg</span></font></i></b></p><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">Sr. Quality Engineer</span></font></p><p><font face="Arial" color="navy" size="1"><span style="font-size: 7.5pt; color: navy; font-family: Arial; ">CQE,CQA</span></font></p><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">Boston</span></font><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; "><span class="Apple-converted-space"> </span>Scientific</span></font></p><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">763-494-1468</span></font></p><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">Cell 612-201-7238</span></font><font color="navy"><span style="color: navy; "></span></font></p><p><font face="Arial" color="navy" size="2"><span style="font-size: 10pt; color: navy; font-family: Arial; ">MS B260</span></font><font color="navy"><span style="color: navy; "></span></font></p><div><font face="Times New Roman" color="navy" size="3"><span style="font-size: 12pt; color: navy; "></span></font><br class="webkit-block-placeholder"> </div></div><div><div align="center" style="text-align: center; "><font face="Times New Roman" size="3"><span style="font-size: 12pt; "><hr align="center" width="100%" size="2"></span></font></div><p><b><font face="Tahoma" size="2"><span style="font-weight: bold; font-size: 10pt; font-family: Tahoma; ">From:</span></font></b><font face="Tahoma" size="2"><span style="font-size: 10pt; font-family: Tahoma; "><span class="Apple-converted-space"> </span><a href="mailto:capri25-bounces@lists.wyc.org" target="_blank">capri25-bounces@lists.wyc.org</a><span class="Apple-converted-space"> </span>[mailto:<a href="mailto:capri25-bounces@lists.wyc.org" target="_blank">capri25-bounces@lists.wyc.org</a>]<span class="Apple-converted-space"> </span><b><span style="font-weight: bold; ">On Behalf Of<span class="Apple-converted-space"> </span></span></b>Kenneth Reiff<br><b><span style="font-weight: bold; ">Sent:</span></b><span class="Apple-converted-space"> </span>Tuesday, December 30, 2008 2:28 AM<br><b><span style="font-weight: bold; ">To:</span></b><span class="Apple-converted-space"> </span><a href="mailto:capri25@lists.wyc.org" target="_blank">capri25@lists.wyc.org</a><br><b><span style="font-weight: bold; ">Subject:</span></b><span class="Apple-converted-space"> </span>[Capri25] Backstay question</span></font></p></div><div><div></div><div><div><font face="Times New Roman" size="3"><span style="font-size: 12pt; "></span></font><br class="webkit-block-placeholder"> </div><p><font face="Times New Roman" size="3"><span style="font-size: 12pt; ">We've replaced the standard "pinch the two wires together" type of backstay adjuster with a very nice, and powerful, cascade system as we've always had problems getting the backstay tight enough to get rid of headstay sag while in breeze. With this new cascading system, trust me, we're not going to have headstay problems anymore.<br> <br>My question? I looked below at the very front of the boat in front of that little wooden piece, and the headstay fitting is only through bolted at the top with no back up plate, and only one bolt in the front stem, under the rub rail. Typical Catalina construction... cheap. <span class="Apple-converted-space"> </span><br> <br>Has anyone in the Wayzata fleet improved their backstay adjusting arrangement with a more powerful cascade? And has anyone ever beefed up the headstay piece? I'm thinking of removing it, then welding on a much longer tang, so that I have about three bolts through the stem of the boat, not just one. Plus, Catalina used no back up plates, only washers, which scares me. Has anyone put on too much backstay tension and yanked the headstay fitting right off the freaking deck? Or am I just being paranoid because these boats are built so poorly? Thoughts on yanking off your headstay fitting would be appreciated. If you could, please email me at<span class="Apple-converted-space"> </span><br clear="all"><br>--<span class="Apple-converted-space"> </span><br>Ken Reiff<br>Email: <a href="mailto:kenreiff@gmail.com" target="_blank">kenreiff@gmail.com</a><br>Cell: 562-637-6630</span></font></p></div></div></div></div><br></div></div>_______________________________________________<br>Capri25 mailing list<br><a href="mailto:Capri25@lists.wyc.org" target="_blank">Capri25@lists.wyc.org</a><br><a href="http://lists.wyc.org/mailman/listinfo/capri25" target="_blank">http://lists.wyc.org/mailman/listinfo/capri25</a><br></blockquote></div><br><br clear="all"><br>--<span class="Apple-converted-space"> </span><br>e-mail:<span class="Apple-converted-space"> </span><a href="mailto:garry.cooke@gmail.com" target="_blank">garry.cooke@gmail.com</a><br></div></blockquote></div><br><br clear="all"><br>--<span class="Apple-converted-space"> </span><br>e-mail:<span class="Apple-converted-space"> </span><a href="mailto:garry.cooke@gmail.com" target="_blank">garry.cooke@gmail.com</a><br></div></kenreiff@gmail.com></emanuel.ruedenberg@bsci.com></garry.cooke@gmail.com></blockquote><div><br class="webkit-block-placeholder"></div><hr><div><br class="webkit-block-placeholder"></div>_______________________________________________<br>Capri25 mailing list<br><a href="mailto:Capri25@lists.wyc.org">Capri25@lists.wyc.org</a><br><a href="http://lists.wyc.org/mailman/listinfo/capri25">http://lists.wyc.org/mailman/listinfo/capri25</a></blockquote>_______________________________________________<br>Capri25 mailing list<br><a href="mailto:Capri25@lists.wyc.org">Capri25@lists.wyc.org</a><br><a href="http://lists.wyc.org/mailman/listinfo/capri25">http://lists.wyc.org/mailman/listinfo/capri25</a></div></span></blockquote></div><br></div></div></blockquote></div></span><br class="Apple-interchange-newline"></blockquote></div><br></div></body></html>