<div>All:</div>
<div> </div>
<div>Those of you who are entering boats into the North American championships, who have boats that are not already certified  (check at <a href="http://www.sonar.org/">http://www.sonar.org</a> under 'Measurement Status') need to be measured.</div>

<div> </div>
<div>On this surface,  this requires a pulling of the boat to weigh it,  pulling of the mast at the gin pole for other measurements.   It will require that boats  line up at the crane and gin pole in turn.  We're thinking that a proper measurement will take about 45 min to an hour,  including all of the boat movement/prep time.</div>

<div> </div>
<div>Our resident measurer apprentice  (acting under authority of the class measurer),  Ernest Brody will be taking appointments on the following days:</div>
<div> </div>
<div>Mon-Wed Aug 29-31   4pm to 8pm</div>
<div> </div>
<div>Tues-Wed Sept 6-7    4pm to 8pm.</div>
<div> </div>
<div>We will need to get as many boats as possible measured within this time frame because at regatta time will have boats from away that will need measurement when they arrive as well as sail measurement for all. (sail measurement typically happens immediately before the regatta)</div>

<div> </div>
<div>I'm serving as the secretary for this operation.   Please email me with the time slot by hour that would work best for you.   Have your boat ready at the gin pole or crane at that time on the date of the appointment.</div>

<div> </div>
<div>Also as a reminder,  each boat will need to have one Sonar class member as the skipper on board as well as that person being a member of US Sailing (which is by choice included in your WYC club membership).   For best results,  please take care of that ASAP through http:/<a href="http://www.sonar.org">www.sonar.org</a><br clear="all">
<br>-- <br></div>
<div>Thomas Brown</div>
<div>"Maximizing Business by Minimizing Surprises"<br>~~~~~~~~_/)~~~~~~~~_/)~~~_/)~~~~~~~~</div><br>