[Sonar] Help needed with Spreader Repair

[David Olson]

Howard,

 

Does yours look like this?

 

 

 

 

http://www.rigrite.com/Spars/Kenyon_Spars/2740-MORC.html#Retrofit%20Spreader%20Bar%20&%20Plate%20Kit%20for%20Sonar%20Mast:%20K-11867K:

 

Is the stainless plate chewed up or do you just need to replace the through bar?

 

 

David Olson

Commercial Engineering

The Toro Company

952.887.8697 (Direct)

david.olson at toro.com

 

________________________________

From: sonar-bounces at lists.wyc.org [mailto:sonar-bounces at lists.wyc.org] On Behalf Of Howard Noreen
Sent: Monday, April 16, 2007 7:47 AM
To: sonar
Subject: [Sonar] Help needed with Spreader Repair

 


Hello all 

I see that we already have one Sonar in the water. 
I am working diligently to get Soñar in the water. 

I noticed last year that my spreaders were loose and ordered the kit from Shumway this winter. 
I just got my boat out of storage this Saturday and now that I can look at the mast, I see that I currently have a different set up than what I have seen on most other boats. 
My mast is the original mast but I believe someone made a repair to the spreaders earlier. 
I currently have a single plate that wraps around the front of the mast in stead of the two separate plates in the repair kit. 
Has anyone else had this? 
I am concerned that if I remove this plate, that is riveted on with pop rivets, and now replace it with the new plates from Shumway that I will be adding additional holes in the mast at a place that is already a weak link. 
Does anyone have any experience with this or can anyone offer any opinion. 

Thanks for your help with this.

Howard
________________________

Howard Noreen
Director of Early Adopter Programs
________________________
Lawson Software
380 St. Peter Street
St. Paul, MN 55102-1302
Office (651)767-6209
Cell (612) 804-8498
Fax (651) 767-7209
howard.noreen at us.lawson.com
http://www.lawson.com

*****************************************************************************
The information in this email is confidential. It is intended solely for the addressee. Access to this email by anyone else is unauthorized.

If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Information contained in this email is subject to the  terms and conditions expressed in the governing Lawson Client agreement.
****************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.wyc.org/pipermail/sonar/attachments/20070417/547f402c/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 5941 bytes
Desc: image001.gif
Url : http://lists.wyc.org/pipermail/sonar/attachments/20070417/547f402c/attachment.gif 
-------------- next part --------------
This electronic message including any attachments ("Message") may
contain information that is privileged, confidential and/or exempt from
disclosure under trade secret and other applicable law. If you are not
the intended recipient, notify the sender immediately, permanently
delete all copies of this Message, and be aware that examination, use,
dissemination, duplication or disclosure of this Message is strictly
prohibited.