[Sonar] North American Championship Measurement time slots

[Mark Kochendorfer]

Put liberty down for the 30th at 4:30pm.

Thanks

On 8/17/11, Thomas Brown <tbrown9164 at gmail.com> wrote:
> All:
>
> Those of you who are entering boats into the North American championships,
> who have boats that are not already certified  (check at
> http://www.sonar.org under 'Measurement Status') need to be measured.
>
> On this surface,  this requires a pulling of the boat to weigh it,  pulling
> of the mast at the gin pole for other measurements.   It will require that
> boats  line up at the crane and gin pole in turn.  We're thinking that a
> proper measurement will take about 45 min to an hour,  including all of the
> boat movement/prep time.
>
> Our resident measurer apprentice  (acting under authority of the class
> measurer),  Ernest Brody will be taking appointments on the following days:
>
> Mon-Wed Aug 29-31   4pm to 8pm
>
> Tues-Wed Sept 6-7    4pm to 8pm.
>
> We will need to get as many boats as possible measured within this time
> frame because at regatta time will have boats from away that will need
> measurement when they arrive as well as sail measurement for all. (sail
> measurement typically happens immediately before the regatta)
>
> I'm serving as the secretary for this operation.   Please email me with the
> time slot by hour that would work best for you.   Have your boat ready at
> the gin pole or crane at that time on the date of the appointment.
>
> Also as a reminder,  each boat will need to have one Sonar class member as
> the skipper on board as well as that person being a member of US Sailing
> (which is by choice included in your WYC club membership).   For best
> results,  please take care of that ASAP through http:/www.sonar.org
>
> --
> Thomas Brown
> "Maximizing Business by Minimizing Surprises"
> ~~~~~~~~_/)~~~~~~~~_/)~~~_/)~~~~~~~~
>

-- 
Sent from my mobile device

Mark