[Capri25] Capri Questions

[Chris McKillip]

#1- Catalina direct sels the rub rail for the boat, its the small section, they also sell the aluminum sections in 8'-0" lenths.

#2. I would wax the post and insert epoxy from the top, and let it start to kick, then rotate the tube to break the bond and pull the shaft out.

#3 Catalina Direct also sells the replacment parts for the drains. It comes in a kit with instructions, and all of the nessary supplies to fix it.

I would also suggest checking the International Association for any information on these fixes, we now have over 100 owners of Capri 25's all over the US and Canada.

http://www.catalina-capri-25s.org/forum/
 

Message: 1
Date: Tue, 17 Apr 2007 10:20:20 -0500
From: "Ruedenberg, Emanuel \(Rudy\)" <Emanuel.Ruedenberg at bsci.com>
Subject: [Capri25] Capri fixes
To: <capri25 at lists.wyc.org>
Message-ID:
	<90E0E868DC78E84BB31BF0954B9F17B701A21D65 at MAPMAIL01.bsci.bossci.com>
Content-Type: text/plain; charset="us-ascii"

A couple of Capri boat questions we came across while fixing stuff on
Lickety Split:
1) Does anybody know where one can buy a new rub rail?  And how hard is
it to install?
 
2) When we pulled out the tiller post we noticed inside about mid way
down the thru hole that there is a very small hole on the inside where
water could basically splash up into and leak into the bilge area.  Has
anybody else had this issue?  Any suggestions on best way to plug?
 
3) Has anybody replaced the cockpit drain thru hole sleeves at the base
of the transom?  Where can you buy new ones?  We noticed some leakage
there.
 
tks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.wyc.org/pipermail/capri25/attachments/20070417/dfbea731/attachment.htm